It's pretty clear this guy has never rollerbladed.
Roller blading takes more time to begin and end, requires an uncomfortable kind of footwear that restricts where you can go, has very limited top speed, is slower to accelerate and decelerate, takes up just as much horizontal space as a bike does, is much less stable, and has a higher skill floor. And no way does it mix with pedestrians.
He could at least have seemed honest if he said skateboards, which are equally sexy and actually get noticeable mileage.
Complains about unnatural bike posture and testicle damage compared to the... slightly bent posture of rollerblading with aching ankles and feet (until they strengthen up, i guess? i never got there). I think you might be right about the never rollerbladed before part.
Then explain my still ongoing back aches that agravate every time I try to ride my bike again while I'm still waiting for the appointment with my traumatologist
Your bike geometry is probably very wrong for you, or potentially some back issues that should be worked with the traumatologist.
But way too big or small bike can definitely make your back hurt, along with potentially other body parts such as neck, hands or knees.
If you have a cash to burn and will to try (and potential health problems resolved), bike shops can help you with choosing right size and bike type for you.
Probably my seating position, not at the bike but everywhere else. Plus maybe my scoliosis. I went to an emergency traumatologist and told me it wasn't anything extremely wrong and it looked like only the muscles affected. He told me to get 10 sessions of kinesiotherapy and after that do an X ray. Which was weird cuz why wouldn't I get the X ray first and why an X ray and not an tomography or ecography that actually looks at the muscle. So I went to a kinesiologist that isn't in my medical insurance but which I trust and told me I didn't have anything extremely wrong but I should get a tomography (or something like that) which he told me to wait for the medical-insurance-covered traumatologist to ask so I can get the scan free, and in the meantime gave me three sessions of kinesiotherapy (90 minutes of massages each session). 99% of pain/annoyance went away, but whenever I try to ride my bike again my lumbar muscles starts to feel a bit funny so I get scared and stop.
Last time I measured my bike frame it was the correct size for me. It's a 26" wheel mtb and the seat has always been at the horizontal level as the handlebars.
I went to the bike shop to get a stem extender and now it looks goofy and I don't like how it feels, but I only rode it 20 blocks since I got it. Anyways, the dude told me "ah you should get a 29" wheel bike to solve your problem" which basically gives me the same seat-handlebar-relative-position but it doesn't look goofy.
But anyways, before all this I used to cycle 15 - 20 km each day with a ~5 kg backpack which was not a good idea at all.
That's a whole another can of worms, but there's commuters from cruisers to fixies so preference? But I meant that the racing trends have moved all adult sizes to 29ers basically
Where I live it's either someone making one in their garage or paying for an imported one 5X to 10X the price you would get them for in the US or Europe. No local factory is making nor assembling recumbent bikes
To use inline skates as a means of transportation, you have to carry both skates and walking shoes, which is not something you have to do with bikes or skateboards. There is also a lengthy transition time between skating and walking because of the need to take off your skates and put on normal shoes, which is not a thing with bikes or skateboards. Inline skates are just not practical for going to the shop, lol.
Eh... not really? If you're cycling and you want to go in the shops you have to stop, get the lock out of your bag (which you had to carry with you) and lock your bike up. Transition time is probably similar between both modes of transport.
I wonder which is more likely to cause an injury, rollerskating or biking. I've only tried rollerskating once but I spent most of that time falling onto the hard floor and hurting my butt.
It's pretty clear this guy has never rollerbladed.
Roller blading takes more time to begin and end, requires an uncomfortable kind of footwear that restricts where you can go, has very limited top speed, is slower to accelerate and decelerate, takes up just as much horizontal space as a bike does, is much less stable, and has a higher skill floor. And no way does it mix with pedestrians.
He could at least have seemed honest if he said skateboards, which are equally sexy and actually get noticeable mileage.
Complains about unnatural bike posture and testicle damage compared to the... slightly bent posture of rollerblading with aching ankles and feet (until they strengthen up, i guess? i never got there). I think you might be right about the never rollerbladed before part.
Cycling is great for your back, I have no idea where that's coming from either. I have had back aches go away just by riding a bike for an hour.
Then explain my still ongoing back aches that agravate every time I try to ride my bike again while I'm still waiting for the appointment with my traumatologist
Your bike geometry is probably very wrong for you, or potentially some back issues that should be worked with the traumatologist.
But way too big or small bike can definitely make your back hurt, along with potentially other body parts such as neck, hands or knees.
If you have a cash to burn and will to try (and potential health problems resolved), bike shops can help you with choosing right size and bike type for you.
Probably my seating position, not at the bike but everywhere else. Plus maybe my scoliosis. I went to an emergency traumatologist and told me it wasn't anything extremely wrong and it looked like only the muscles affected. He told me to get 10 sessions of kinesiotherapy and after that do an X ray. Which was weird cuz why wouldn't I get the X ray first and why an X ray and not an tomography or ecography that actually looks at the muscle. So I went to a kinesiologist that isn't in my medical insurance but which I trust and told me I didn't have anything extremely wrong but I should get a tomography (or something like that) which he told me to wait for the medical-insurance-covered traumatologist to ask so I can get the scan free, and in the meantime gave me three sessions of kinesiotherapy (90 minutes of massages each session). 99% of pain/annoyance went away, but whenever I try to ride my bike again my lumbar muscles starts to feel a bit funny so I get scared and stop.
Last time I measured my bike frame it was the correct size for me. It's a 26" wheel mtb and the seat has always been at the horizontal level as the handlebars.
I went to the bike shop to get a stem extender and now it looks goofy and I don't like how it feels, but I only rode it 20 blocks since I got it. Anyways, the dude told me "ah you should get a 29" wheel bike to solve your problem" which basically gives me the same seat-handlebar-relative-position but it doesn't look goofy.
But anyways, before all this I used to cycle 15 - 20 km each day with a ~5 kg backpack which was not a good idea at all.
I won't comment on the medical part anything since I know jackshit, but happy to hear you've had some good help on the back problems.
Yeah 26" mountain bikes are pretty much all just kid sizes for the past 10 or so years, mostly because of the racing trends lol.
So you are saying the "correct" size for my height is still incorrect cuz it's meant for mtb racing and not for everyday "long distance" commute?
That's a whole another can of worms, but there's commuters from cruisers to fixies so preference? But I meant that the racing trends have moved all adult sizes to 29ers basically
Maybe a recumbent bike is right for you.
AIght I just need to find one that's cheaper than a brand new car
Recumbent bikes should be buyable for about twice the price of a good road bike or hybrid. It's the velomobiles that cost close to what a sedan does.
Where I live it's either someone making one in their garage or paying for an imported one 5X to 10X the price you would get them for in the US or Europe. No local factory is making nor assembling recumbent bikes
deleted by creator
To use inline skates as a means of transportation, you have to carry both skates and walking shoes, which is not something you have to do with bikes or skateboards. There is also a lengthy transition time between skating and walking because of the need to take off your skates and put on normal shoes, which is not a thing with bikes or skateboards. Inline skates are just not practical for going to the shop, lol.
Ehm, lock pedal cyclist here. I carry sandals often in backpack to wear in office etc. /s
Eh... not really? If you're cycling and you want to go in the shops you have to stop, get the lock out of your bag (which you had to carry with you) and lock your bike up. Transition time is probably similar between both modes of transport.
You overestimate the time required to chain your bike up and underestimate the time to change out of inline skates and into walking shoes
I wonder which is more likely to cause an injury, rollerskating or biking. I've only tried rollerskating once but I spent most of that time falling onto the hard floor and hurting my butt.
Per mile, skating is way more hazardous.
This is mostly because people who are not Sonic employees don't get around on skates very much.