After having a good talk with a few folks, I've decided to buy a gaming PC and build it myself. I have everything I need, including all of the necessary equipment and accessories. I don't want to buy anything from NVIDIA because of some of its controversial decisions, its drivers' poor performance on Linux, and its high price. I'm going full red (AMD). Keep in mind that I will not be using Windows on this PC at all and will be running Pop OS on it as my primary operating system. I am also buying all the parts from Bestbuy. My budget is not to go completely over $2000

Two questions

  1. Will everything work properly with all of the PC accessories I'm getting, and is there anything I should replace? (not including the CPU or GPU)
  2. Do you think it will be enough with three fans, or do I need five for extra cooling?

Everything is linked here: https://pcpartpicker.com/user/Crafted_104/saved/XcZCrH

The current price for everything is $1716.78

  • Grebgreb [he/him]
    ·
    5 months ago

    My friend has a 5800x3d and generally it runs better in games that "favor strong single core," ie a horribly unoptimized game like Tarkov where even $5k brand new hardware will be unable to run it on certain maps and updates. I have a 5900x and have gotten better performance than him in a game like Kingdom come, even with a marginally weaker gpu. I would get whichever is cheaper unless you specifically have something in mind that you know would benefit from one or the other.

    I only have 4 fans and currently have a reference blower card atm and the temperatures are fine, however this will depend on the ambient temperature in your room to a degree as well. The Thermalright Peerless assassin 120 is also a very cheap cpu fan that rivals the ~$100 Noctua ones.

    The "general standard" for a lack of a better term for psu's is to get an 80+ gold certified. I wouldn't cut corners on it but I also wouldn't go deep on the other end and get an extremely expensive one. I have a 750w Powerspec one that most people consider mediocre I haven't had any noticeable issues with it. Cables can be a pain in the ass so if you're able to I would get a semi or fully modular one.

    To my knowledge Logitech mice frequently have a ton of problems but they all do to a degree. When I was looking for a new mouse while back, it generally seemed like Logitech had a ton of complaints and Razer's quality dropped significantly around 2014. I have 32gb of ram which has been way more than enough for every game I have played so far, I wouldn't get 64 unless you know you need it or plan on using it.

    • crafted_104 [any]
      hexagon
      ·
      5 months ago

      I've been looking everywhere for a mouse that was of excellent quality and actually worked, but a lot of them were quite bad. I don't like "gaming mouses" and have never been impressed with the quality of Logitech and Razer's other mouses. The only Logitech that was genuinely nice was the ergonomic one. I've tested it before, and it feels much more pleasant to use. I will still keep looking around but for now, that's the only mouse I plan on getting.

      The major reason I chose the 5900X in the first place was since a friend recommended it to me; it was actually not bad for the price, and I expected it to be extremely strong, but it turned out to be too much, so I decided not to get it. I've been looking at the Ryzen 7 5800X3d, but the price went over my budget. So for now, I might plan on getting the 5700X3D.

      I was considering getting 16 GB of RAM, but I thought it was best for me to get more, 16 gigabytes of RAM is fine, but I want to reach the full potential of gaming. I didn't want 64GB of RAM; it would have been far too much. So I'm sticking with 32. This is also why I chose a 2TB SSD over 1TB, or anything lower.

    • PorkrollPosadist [he/him, they/them]
      ·
      edit-2
      5 months ago

      I am begging on my hands and knees for one, JUST ONE mouse where the sensor in the wheel does not go out of sync with the physical clicks and capture double / reverse / nil inputs arbitrarily. I've gone through like 5 mice from different brands where this shit happens.

      • Beetle_O_Rourke
        ·
        5 months ago

        You can clean hair/dust from the encoder or even physically replace it if you can solder.

      • fuckwit_mcbumcrumble@lemmy.dbzer0.com
        ·
        5 months ago

        I don't think I've had a single mouse in the last 15 years with that problem. Do you have a lot of pets? Their fur is really good at getting into mouse wheels and you just have to clean it out.