Edit: Solved, while changing EDID make sure to remove the old module first and reinstall it with the new EDID

I have a faulty DP to HDMI adapter, that unfortunately never seems to parse the EDID data, so while connecting to a TV I used this guide and a 1920x1080.bin file from the internet and it worked, but unfortunately I was unable to use the TV speakers(I guessed the EDID file didn't specify that the device had audio out)

Using a separate pc I extracted my TVs EDID.bin file and repeated the steps but unfortunately, it just doesn't work, its stuck on the old 1920x1080.bin(I can tell because it shows up as 'Linux Foundation 23'') The issue persists even after I delete the old .bin file from /usr/lib/firmware/edid

I am using wayland

System info:

OS: Fedora Linux 40 (Workstation Editi 
Host: TECRA R940 PT439V-03U02WAR 
Kernel: 6.8.11-300.fc40.x86_64 
Uptime: 29 mins 
Packages: 2209 (rpm), 32 (flatpak) 
Shell: bash 5.2.26 
Resolution: 1920x1080 
DE: GNOME 46.2 
WM: Mutter 
WM Theme: Adwaita 
Theme: Adwaita [GTK2/3] 
Icons: Adwaita [GTK2/3] 
Terminal: gnome-terminal 
CPU: Intel i7-3540M (4) @ 3.700GHz 
GPU: AMD ATI Radeon HD 7550M/7570M/765 
Memory: 1998MiB / 7879MiB

Dmesg -H

[Jun20 22:26] Linux version 6.8.11-300.fc40.x86_64 (mockbuild@f09cc32e12c24ed6a1a66c2a2e9f1728) (gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4), GNU ld version 2.41-37.fc40) #1 SMP PREEMPT_DYNAMIC Mon May 27 14:53:33 UTC 2024
[  +0.000000] Command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-6.8.11-300.fc40.x86_64 root=UUID=XXXXX ro rootflags=subvol=root rhgb quiet drm.edid_firmware=DP-2:edid/sony.bin

Any help is appreciated

  • Max-P@lemmy.max-p.me
    ·
    5 months ago

    Did you rebuild your initramfs? The files needs to be available pretty early during boot and that's probably why it still seems the old one.

    • Artemis_Mystique@lemmy.ml
      ·
      5 months ago

      I just did using the dracut command, it didn't change anything, is there another more simpler way to go about this without risking messing up my system?

      • Max-P@lemmy.max-p.me
        ·
        5 months ago

        Dracut is the correct way to do this on Fedora so nothing else needs to be done. Then I'm not sure why it's not taking it.

  • eldavi@lemmy.ml
    ·
    5 months ago

    the last time i tried doing something similar was with a plasma 1080i tv (yes that long ago) connected via hdmi to component adapter and i eventually learned that the nvidia driver will overwrite everything in favor of it's own detection method, thus ignoring the custom edid i provided; perhaps the ati driver your using does something similar?

    i would have tried switching to one of the open source drivers but the tv died and it's replacement had hdmi ports and the problem went away

    • Artemis_Mystique@lemmy.ml
      ·
      5 months ago

      No before i passed the custom EDID it showed up as "Unknown display" and letter-boxed the entire display, limiting my resolution to 640x480 and 1366x768