Hi, I have never build a PC before, that is why I am asking you for your help and suggestions. I have informed (or misinformed) myself about a few aspects of building a PC. I will give my reasoning why I chose each part, and let you decide why I am wrong.

Usage:

The goal of this build is to create a Gaming PC which can play most games at least at lower resolutions and at sufficient frame rate. I plan to build this PC with future software requirements in mind, to reduce e-waste and to leave room for possible upgrades. This PC should support Coreboot to allow for firmware updates, even after the official firmware support has stopped. This machine will run Linux as the main OS and probably Dasharo as the Coreboot-distribution. The main use is playing games and emulation, but I also intend to use it for virtualisation.

Components:

  • Motherboard: Pro Z790-P Wifi (DDR5 Variant)
  • CPU: Intel Core i5-13600KF (Alder/Raptor_Lake-S)
  • CPU-Cooler: Scythe Fuma 3 67.62 CFM CPU Cooler (4-30 dB)
  • GPU: XFX Speedster QICK 309 Radeon RX 7600 XT 16 GB Video Card
  • RAM: G.Skill Ripjaws S5 32 GB (2 x 16 GB) DDR5 5600 (CL 28)
  • Storage: Samsung 980 Pro 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive
  • PSU: SeaSonic FOCUS Plus 650 Gold 650 W 80+ Gold Certified Fully Modular ATX Power Supply

Why did I choose those parts?

Motherboard:

  • The main two reasons why I choose the Z790-P are, that the motherboard needs to support Coreboot and that it is DDR5 compatible.
  • I could not care less if the motherboard supports Wifi or Bluetooth, since the PC is not going to leave my desk, but I will not complain for having it.

CPU:

  • Since I already decided on a motherboard, the manufacturer decided the CPU-brand for me. In this case Intel. The CPU-socket only allows for microarchitectures Alder and Raptor Lake-S, so my choice is limited. Intels 13th and 14th generation CPUs have many reported issues. Intel reported that many of those issues are due to faulty voltage configuration in the motherboard bios, which cause the CPU to degrade at an accelerated pace. They are due to release a microcode patch mid-august, which reportedly fixes the issue without a significant performance loss. Obviously, this patch will not fix already damaged chips. Another problem is, that they had some issues while manufacturing these chips in 2023, which caused oxidation and therefore degradation.
  • Generally you want more from everything, cores, threads and core clock, except power usage.
  • You also have the choice between a CPU with integrated graphics or without. To save the environment and my bank account I will choose one without it. For Intel that is every CPU with the "F" designation. As thingsiplay and felsiq have pointed out there can appear several issues, when building a system without a integrated GPU. One which is, that it becomes harder to debug issues, since you can not just unplug your GPU, to test if the GPU drivers are at fault.

CPU-Cooler:

  • Check if the TDP matches your CPU, e.g. >=125 W for 125 W.
  • Check if it matches your motherboard and case, i.e. everything fits.
  • Lastly, make sure it is not to loud.

GPU:

  • Main OS is Linux, so I will spare myself the pain and choose AMD over Nvidia.
  • More demanding games use more video memory. I have read that 8 GB often is not enough anymore.

RAM:

  • Virtualisation often needs a lot of resources i.e. RAM.
  • For optimal performance your RAM-speed should match your CPU. Any more and you waste money, any less and you create a bottleneck. Since the i5 only has 5600 MT/s, any more is wasted.

Storage:

  • Since most games today use around 60-150 GB, this PC will need a lot of storage. About thirteen 150 GB games can be stored on a 2 TB drive. I hope this will suffice.

Power supply unit:

  • Deciding factors are form factor and power. You can not use your PSU, if it either does not fit in your PC-case or does not have enough juice to power your other components.
  • Your PSU should have a few more 20-30 % clearance in case of a spike. I think a 650 W PSU should be enough for a workload of 490 W idle. Please, correct me, if I am wrong.
  • Some people recommend buying a PSU with more power than needed to allow for upgrades with higher power usage, but apparently the PSU will not run efficiently in this case. I have read that a PSU should be most efficient at idle hardware usage to maximize power savings. E.g. do not buy a 1000 W PSU, when you only use around 400 W at idle.
  • Also important are the +12V-rails. You should make sure the supply at least 24 A. Lastly you should check which power plugs the PSU will/can use.

Since I plan something special for the PC-case, it will not be part of this post. I hope this post can be used by others in the future, as a reference for building a Linux PC.

PS: This is my first post on lemmy. I am sorry for any formatting errors. I hope the post is legible.

Edit:

  • added links for explanation
  • fixed some grammatical errors
  • added suggestions from the comments

It is getting late here. I will look into a substitute for intel tomorrow (8 hours from the latest edit) and add this here.

  • felsiq@lemmy.zip
    ·
    4 months ago

    Your build looks good (setting the ongoing intel issues that somebody else already mentioned aside), but personally I’d consider a different drive than the Samsung - it’s a great drive, but usually overpriced imo. If you can get it for a good price then absolutely go for it, but most times I find sn850x drives significantly cheaper and insignificantly slower. Otherwise, the only other note I’d make is that grub is abysmally slow at higher resolutions on chips with no igpu, at least when using a nvidia gpu. I’m not certain if this would apply to an AMD gpu, and either way you can just use something better (cough cough refind) to avoid the problem, but for anyone who just wants the default out-of-the-box bootloader on most distros to just work properly it might be worth spending the extra ~$40 for the K series instead of the KF to get the igpu. It’s not something I’d recommend doing personally, but it’s at least worthwhile to know about when you’re making the K/KF choice imo. Anyway, good luck with your build and have fun with setting everything up!

    • B0g3nNutz3r@lemmy.ml
      ·
      4 months ago

      Thank you for this interesting information. I use systemd-boot with secure-boot. I do not know if it has the same issue, but I hope not. If it does, I might consider switching my boot loader or when nmbl is ready ditch it entirely. Like thingsiplay mentioned though, it still might be a good idea to use an iGPU for debugging purposes.