Yeah, i disabled basically all telemetry on windows. I also will never upgrade to 11. It sucks donkey balls. Also I haven't noticed any change in edge being gone. Maybe I just got lucky.
Forgot to say, I got my keys from a system builder who had a shit ton of them but had to get them off the shelves because windows 11 was around the corner. So they are all legally obtained.
That is exactly why you buy cheap keys for your windows install and remove everything you don't need. Edge got nuked from orbit by me and most annoying ads disappeared with it. I killed all notifications and I am now much happier.
Glad it worked out for you. Good luck and happy printing. Send me a message if you need help with the firmware. Cheers.
Marlin is the name of the firmware. It can be configured for any printer. It stands between the cpu of the mainboard and the motion system, telling the cpu what hardware you have and how to use it.
Idk about the extruder, but maybe you should compile marlin from scratch. The display issue seems to indicate that marlin has basically no idea what to do with it. Silent motherboard might not be working, because the hybrid threshold is set too low (e.g. switches from stealthchop to spreadcycle too early) or it just operates in spreadcycle. The probe can also be attributed to bad firmware. If you want to dive deeper or need help, hit me up, we'll figure it out.
Also PID tune your hotend with this command: M303 E0 C5 S210 U
Alright. That is great to hear. Already thought of the slack, but the backlash might be a problem. I'll figure something out. Cheers!
I used the windows debloater to remove most telemetry and then shut off services that were left in the task manager until something broke completely. It was a bit of a process but it worked. I use my PC for 3d modeling and gaming. Never used half the integrated apps because I have no need or already have better ones or actually a physical calculator. In general with my PCs I just delete anything that I will never use. Like office for example.