- cross-posted to:
- freecad@lemmy.ml
- cross-posted to:
- freecad@lemmy.ml
You must log in or register to comment.
Apparently Ondsel recently announced they’re shutting down, partially due to this release. A lot of what Ondsel added to the FreeCAD experience is just merged into FreeCAD now. Sad to see it but at least all their work wasn’t for nothing.
https://ondsel.com/blog/goodbye/
Really sad to hear this, I just found out about Ondsel recently. Glad to hear FreeCAD is getting their merges, but I really would have liked to see Ondsel find a market all its own.
I have tried freecad a number of times to replace solidworks as a critical piece of closed source software in hardware development toolchains. I have always struggled. Yesterday someone spent an hour with me at a makespace saying... "FreeCAD has a different way of doing this/try realthunder branch/use symmetry condition/delete all conditions that coincide" ... it has been worth years of trying alone. When I started solidworks the reseller gave me a week of training - this is often why complex FOSS software gets a reputation for being clunky, because alone you will spend ages hunting a GUI button in a complex interface.
TLDR: Go outside, go to makespace or a FREECAD conference - meet other people who use open source software - its much easier to use/learn from others than alone.
When I started using SOLIDWORKS I had 0 training, still managed to make it work. FreeCAD is still frustrating after a lot of effort. But I keep trying, because it's the only real open source option
Interesting, when I started using FreeCAD I had 0 training, and I have managed to make it work just fine. Was mostly frustrated by the topological naming problem, but that is fixed now.
You can do quite complex things with it.
You just have to put in a bit of effort and think in an additive sketch-extrude workflow. But yeah, not easy to transition from solidworks.
The best thing about 1.0 is that it has ported most fo the topalogical fixes from realthunder!
Well or use the forums. They have a wonderfully helpful community
I kinda want to try it out just as a hobby, is it decent or should I look elsewhere?
No. The people who struggle with FreeCAD struggle because they leaned something else first. Its the same reason Photoshop trained users complain about GIMP while people who learned GIMP first dont complain.
Learn FreeCAD first, and you won't be handicapped
They struggle with FeeCAD for the same reason they struggle with ANY little change in software-- they simply don't want to be bothered to learn something new. It's called being lazy.
I went Inventor -> SOLIDWORKS -> Fusion -> SOLIDWORKS with maybe 3% of the issues I've had with FreeCAD.
You can't easily create models based on other models, or place things around as easily,, it's always a mess of shape binders and fixed coordinates, it really limits the capabilities of the software.
I'm always checking forums, discords, YouTube for the simplest things.... I'm trying and I keep trying, but it's very obtuse to just dismiss the issues as "people don't want to learn", 'cause I'm putting more time into FreeCAD than any other CAD, and getting shit results.
You can say you have put in the effort to learn it and the effort doesn't pay off for you. It happens and is nothing to be ashamed of. But the blunt truth is the majority do NOT want to learn anything new because change is scary and simply want to complain about the tiniest difference. If I had a nickle for every time I've tried to help someone with FreeCad and they start complaining how FreeCAD isn't like Fusion360 and why isn't it, I probably could afford that SW license. No shit, It ain't Fusion.
There's a huge difference between a CAD package that has had millions of dollars and multiple development teams spent on it to polish and tweak it into perfection and a small team of volunteers that are working in their basements and backyards for free so they can give it away for free. Why would you be surprised and upset that it can be chaotic and janky. Your choice is to either continue to climb that mountain to master FreeCAD or to move on to something that does make you happy. To quote that famous puppet, " Either do or do not. There is no try"
I will tell you that any CAD package is simply a tool-- a means to an end and not the end itself. And if the tool doesn't work for YOU after giving it a good try, don't use that tool. I will also say that despite enjoying the sackcloth and ashes of FreeCAD, I would never recommend it for professional use. It's not ready for prime time. There are better tools out there for that field of battle. But that doesn't mean FreeCAD is not a useful tool and can do a lot of impressive things if you wish to spent the effort.
On the contrary, I learned nothing first and I struggled pretty bad.
After a while though you start to get a grasp on things.
pretty much, but its really crossing some thresholds lately which i find impressive
tbh... I like it more than OnShape, but I also just use it as a hobby for 3dprinting.
It's still... Difficult if you're used to commercial CAD suites, but it's leagues better than it used to be
I loved the idea of FreeCAD but having no experience in CAD software at all I always struggled with fundamental basics that were not covered in the tutorials I watched. The huge amount of work benches (some of them 3rd party) did not help since most forum posts or tutorials were based on different or outdated versions.
Having a go with build123d now, trying to model stuff using python. At least the number of available API functions is manageable and everything else is just programming (which I already know).
If you want the best tutorials on FreeCAD, check out mangojelly on youtube. He has a current 1.0 beginner series that starts right from the very beginning. And he goes slow enough to easily follow along.
Ignore the huge number of workbenches. You can even go to the Settings and turn the ones you don't need off so you never see them again. You are only going to use 2 workbenches 90% of the time-- Part Design and Sketcher. And as you get more experience, you might add another couple of workbenches as you go. Most of the third party workbenches are specialty things. For example, I sometimes need to design and make gears or do small sheetmetal work. So I have the Gear and sheetmetal workbenchs installed. You probably would never need it.
Learning CAD, no matter what flavor, does require effort. It's as much about learning how to think as it is about learning how to do.
I find the opposite. There's so many videos on FreeCAD its wonderful. And if you're stuck, ive posted to the forums and within a week someone literally took my file and made a video showing how to do what I couldn't figure out.
Such a fantastic community.
I just treid it a bit. And I have to say its quite incredible how good it got! Still a bit rough but I would say its 30% better than a year ago. But maybe ondsel just got me into the mindset of this program.
Its sad to see ondsel go because I doubt we would be here without them.
I hope the freecad team sees all the incredible feedback and the next few versions will be similar improvements for usabilty!
Wait, what happened to Ondsel? I've been using it for the last several months as it just seemed to make more sense than FreeCAD did...
Ondsel was not a profitable product as far as I understood. Which is understandable, but I think they would have needed more time and money to make freecad a real competitor over established cad tools
I've tried it for a few hours, but basic stuff seems incredibly needlessly difficult. After thousands of hours in Solidworks it's just too painful.
Oddly, despite the 1,000's of hours of SW myself, I had little difficulty in picking up FreeCAD. Or Fusion or OnShape, (even taught OnShape to high school students), or SolidEdge. Once you understand the design process of CAD, it's not all that hard. I do have preferences in UI's and workflows, but that doesn't mean I can't use something different.
All the others you listed are very similar to solidworks and no problem. FreeCAD decided sketching should be completely different. I can barely even draw a line and I don't understand how that's possible.
Why does it surprise you much that FreeCAD isn't like SW? And why do you think it should be?
Because solidworks is the gold standard in the space and is intuitive for millennials that grew up on computers. It mirrors other software that came before in terms of super basic stuff like how to draw a damn line. If you're going to do a big swing and change the paradigm with a fundamentally better way, it better be really good for a really good reason.
You just want to be angry and complain about something don't you. Either get over it and learn to use FreeCAD or don't. But whinging is unproductive and useless.
Last time i tried it was crashing a bit. I am excited to try again, it's such a needed tool
