They're fine if you screw them all the way down and just never try to use the tremolo function*. A true hard tail is better for overall pick attack/initial sustain, and won't suffer from tuning stability issues if you don't have either a block or strong enough springs holding the 6-point trem down inside the body cavity, but the 6-point vintage trems are OK in that configuration. If nothing else, it's a lot less work to set up than a Floyd Rose, but god damn, a Floyd that is properly set up and intonated can stay in tune for weeks at a time. That initial setup on a Floyd -- especially if you change string gauges -- is absolute hell, though.
Tuning stability problems with Fender-style bridges are often a problem with strings binding in the nut slots, especially on the MiM and Squier models. A little bit of graphite lubricant in the slots can alleviate this, unless the slots are too deep or too narrow, in which case, someone (preferably a qualified tech with the right set of gauged files) will need to do some cutting and/or shaping.
Thank you for subscribing to Tankie Amateur Luthier Facts.
*If your saddle height adjustment screws are long enough that you can lift the saddles up to compensate for the bridge plate being lower. Otherwise, you're getting into weird bridge plate shim territory.
explain
It’s a sweet guitar to play. But the bridge shown in the second pic suuuuuucks to setup/use. Especially if you’re a beginner.
Why is the 2nd pic reversed though?
Easier than getting a picture of the saddles arranged that way, probably.
They're fine if you screw them all the way down and just never try to use the tremolo function*. A true hard tail is better for overall pick attack/initial sustain, and won't suffer from tuning stability issues if you don't have either a block or strong enough springs holding the 6-point trem down inside the body cavity, but the 6-point vintage trems are OK in that configuration. If nothing else, it's a lot less work to set up than a Floyd Rose, but god damn, a Floyd that is properly set up and intonated can stay in tune for weeks at a time. That initial setup on a Floyd -- especially if you change string gauges -- is absolute hell, though.
Tuning stability problems with Fender-style bridges are often a problem with strings binding in the nut slots, especially on the MiM and Squier models. A little bit of graphite lubricant in the slots can alleviate this, unless the slots are too deep or too narrow, in which case, someone (preferably a qualified tech with the right set of gauged files) will need to do some cutting and/or shaping.
Thank you for subscribing to Tankie Amateur Luthier Facts.
*If your saddle height adjustment screws are long enough that you can lift the saddles up to compensate for the bridge plate being lower. Otherwise, you're getting into weird bridge plate shim territory.
The second pic shows the bridge of the guitar. If you know what happened with PewDiePie and a bridge...
Hoping he jumped off one
I had to look it up. PewDiePie said the gamer word while on a bridge while playing PUBG. This is apparently referred to as "The Bridge Incident."
A lot of people are diving, including myself initially, way too deep into the guitar pictures.